Dillon Quick Balance Tension Meter Bedienungsanleitung PDF herunterladen (Seite 24)

24 Quick Balance User Instructions

7 Troubleshooting

Problem Possible Cause Solution

Powers on momentarily and turns off Low battery Replace with high quality alkaline batteries

Does not power on Low battery Replace with high quality alkaline batteries

Batteries installed backwards or no

spring contact

Insure that positive terminals of both batteries

(nub) face inward – towards the black cap.

Check that spring is attached to the battery

cap.

Software reset Remove battery cap & reinstall after one

minute. Attempt to turn power on again.

Display contrast too light Hold the Right Arrow key down while pressing

the F2 key several times to increase the

display contrast. If nothing occurs, release both

keys. Press the power button and try again.

Display is completely dark Display contrast too dark Hold the Arrow key down while pressing the F1

key several times to decrease the display

contrast.

Display drifts downward once installed Wire material is creeping and internal

friction between wires is relieved.

This is normal behavior of wire. Lower display

resolution to mask this effect.

Temperature not accurate Instrument changed temperature

environments

Allow instrument to remain in environment until

temp stabilizes or enter temp manually

Instrument exposed to sun Enter temp manually

1 2 ... 19 20 21 22 23 24 25 26

Keine Kommentare

Dillon Quick Balance Tension Meter Bedienungsanleitung Seite 24